Slide 1 Slide 2 Slide 3 Slide 4 Slide 5 Slide 6 Slide 7 Slide 8 Slide 9 Slide 10 Slide 11 Slide 12 Slide 13 Slide 14 Slide 15 Slide 16 Slide 17 Product List
Slide5

Next, connect the 18-pin DT cable to the Breakout Board. Be sure to match Pin 1 on the cable to Pin 1 on the Breakout Board. Step 4, connect the 18-pin DT cable to the back of the 3D50 Display. Note that this connector is keyed.

PTM Published on: 2016-05-24