Refine Search
Filter Options Stacked Scrolling
Eval Board
Current Out
Voltage Out
Supply Voltage
Features
Quiescent Current [Typical]
Component Count + Extras
Application / Target Market
Design Author
More Filters

Designs (9)

9 Results - Page 1/1
Schematic View Design
Power Management > OR-ing Controllers DC1676A: 20A OR'ing or Dual Diode, 4.5 ~ 60V in Manufacturer: Analog Devices Inc.

Demonstration Circuit 1676A showcases the LTC®4359 ideal diode controller with reverse input protection. The board includes two independent LTC4359 ideal diode circuits, sharing a common ground and operating over a 4.5V to 60V range. Each circuit comprises a load switch and ideal diode connected in series. Power to the load may be turned on and off by using the SHDN input, and the load is protect…

Schematic View Design
Power Management > OR-ing Controllers DC1926A: Dual Ideal Bridge Controller Manufacturer: Analog Devices Inc.

Demonstration circuit 1926A features the LTC4353, a dual low voltage ideal diode controller, in a typical 12A application. The LTC4353 creates two near-ideal diodes using external N-channel MOSFETs thereby replacing high power Schottky diodes and their associated heat sinks. Ideal diodes enable low loss power ORing and supply holdup applications.

Schematic View Design
Power Management > OR-ing Controllers DC1066A: 48V @ 5A Ideal Diode-OR Controller Manufacturer: Analog Devices Inc.

Demonstration Circuit 1066 showcases the LTC4355 positive high voltage diode-OR controller and monitor in a 200W, 48V application.

Schematic View Design
Power Management > OR-ing Controllers DC2180A: Dual Negative Voltage Ideal Diode - ORing Controller and Monitor Manufacturer: Analog Devices Inc.

Demonstration circuit 2180A showcases the LTC4371 dual negative voltage ideal diode-OR controller and monitor, in a ?48V, 50A application.

Schematic View Design
Power Management > OR-ing Controllers DC1203A: ORing 2 x 5A @ 48V (75V Max) Manufacturer: Analog Devices Inc.

Demonstration Circuit 1203 showcases two LTC4357s in a 48V, 5A application. The circuits are operational over a range of 9V to 75V and are fully independent, with the exception of a common ground.

Schematic View Design
Power Management > OR-ing Controllers DC1899A-B: 12 V, 9 A OR'ing Controller Manufacturer: Analog Devices Inc.

Demonstration circuit 1899A controls two independent power rail circuits each with Hot Swap™ and ideal diode functionality provided by the LTC4228-1/LTC4228-2 dual ideal diode and Hot Swap controller. DC1899A facilitates evaluation of LTC4228 performance in different operation modes such as supply ramp-up, power supply switchover, steady state, and overcurrent faults.

Schematic View Design
Power Management > OR-ing Controllers DC2160A: 1.7 ~ 18V in, 2 Ch Power Prioritizer Manufacturer: Analog Devices Inc.

Demonstration circuit 2160A uses the LTC4419 to provide backup switchover, keeping the output load powered during brown out or power loss conditions.

Schematic View Design
Power Management > OR-ing Controllers DC2705A: 12V @ 7A, Ideal Diode with Reverse Input Protection Manufacturer: Analog Devices Inc.

DC2705A showcases the LTC4376 ideal diode controller with integrated MOSFET and reverse input protection up to –40V. The LTC4376 has a current capability of 7A. The board includes two independent LTC4376 ideal diode circuits sharing a common ground and operating over a range of 4V to 40V.

Schematic View Design
Power Management > OR-ing Controllers MAX40203EVKIT#: 1.2 ~ 5.5V @ 1A, Ideal Diode-OR Controller Manufacturer: Analog Devices Inc./Maxim Integrated

The MAX40203 evaluation kit (EV kit) provides a proven design to evaluate the MAX40203 “ideal-diode”. This EV kit demonstrates the MAX40203 in a space-saving 5-pin SOT23 (MAX40203AUK+). This EV kit can be used to evaluate the MAX40203AUK+ as well.

9 Results - Page 1/1